+86-15824400033

Película de techo de PVC Proveedores

Hogar / Productos / Película de techo de PVC
POR QUÉ ELEGIRNOS

Película de techo de PVC Proveedor de fabricante

Zhejiang MSD Group Share Co., Ltd. esto es china Película de techo de PVC proveedores y Película de techo de PVC Fabricantes. Fuimos fundados en 2002 y tenemos nuestra sede en Warp Knitwear Industrial Park, ciudad de Haining, provincia de Zhejiang. MSD siempre ha insistido en la innovación independiente y siempre ha considerado la innovación tecnológica y de productos como una medida importante para mejorar nuestra competitividad en el campo nuclear. Desde su fundación, a través de la investigación y el desarrollo continuos, MSD se ha convertido en un sistema de productos tridimensionales que integra materiales decorativos ecológicos, materiales deportivos funcionales y otros materiales flexibles, cubriendo muchos escenarios de aplicación. En la actualidad, los principales productos de MSD incluyen: pancarta flexible publicitaria, película calandrada de PVC, película de techo de PVC, tela de costura recta, tela para toldos, tela impermeable de PVC, PVC. tela de malla, lona de PVC y otros productos. ¡MSD da la bienvenida a clientes nuevos y antiguos que juntos logran una carrera brillante!

Certificado por

Conocimiento de la industria

PVC Ceiling Film Installation and Maintenance Guide: Common Problem Solving and Service Life Extension Strategies

PVC Ceiling Film Installation and Maintenance Guide

-- Common Problem Solving and Service Life Extension Strategies

1. Preparation before Installation

Inspection and Treatment of the Base
Ensure that the ceiling is flat, dry, and free of cracks or peeling (uneven areas need to be repaired with putty).
Remove dust and oil stains to avoid affecting the adhesion of the glue.

Environmental requirements
The room temperature is recommended to be between 10°C and 35°C, and the humidity is ≤70% to prevent the material from expanding and contracting.

Tools and Materials
Need to prepare: PVC special glue, utility knife, roller, tape measure, laser level, etc.

2. Installation Steps

Measurement and Cutting
Reserve 5~10cm margin according to the actual size to avoid splicing errors.
Use a sharp blade to cut and ensure neat edges.

Gluing and Pasting
It is recommended to apply glue evenly by "dot coating" or "strip coating" and let it stand for 1~2 minutes (the glue will be more firmly pasted after it dries slightly).
Lay from the center to the surroundings and use a roller to remove bubbles.

Joint treatment
The joints need to overlap 1~2cm, soften with a hot air gun and flatten to form a seamless effect.

3. Common problems and solutions

Issue Cause Solution
Edge lifting Insufficient adhesive or uneven substrate Reapply adhesive and press firmly, or trim and reattach the lifted section
Surface bubbles Inadequate air removal or uneven adhesive application Puncture bubbles with a needle, inject adhesive and flatten
Visible seams Uneven cutting or low temperature during installation Reheat the seam area and reinforce with a pressure roller
Local discoloration Moisture exposure or prolonged UV radiation Select UV-resistant products and avoid humid environments
Adhesive residue Excess adhesive not cleaned promptly Wipe immediately with alcohol pads before adhesive dries
Complete detachment Poor substrate preparation or adhesive failure Thoroughly clean substrate and reinstall using high-temperature resistant adhesive

4. Maintenance and life extension strategies

Daily cleaning
Wipe with a soft cloth dipped in a neutral detergent. Steel wool or strong acid and alkali detergents are prohibited.

Avoid physical damage
Do not scratch with sharp objects. Heavy objects need to be hung with a special bracket.

Environmental control
Keep the room ventilated. The dehumidifier can be turned on during the rainy season to prevent mildew.

Regular inspection
Check the joints and edges every six months. If the glue is found to be debonded, it should be repaired in time.

5. Factors affecting life

High-quality materials: Choose a PVC film with a thickness of ≥0.2mm and UV resistance, which can reach a life of 8~15 years.
Construction quality: Professional installation can reduce the cost of later maintenance.
Use environment: A model with stronger weather resistance should be selected in high temperature and high humidity areas.

Our Historia

2002 establecido

En 2002, se estableció Zhejiang MSD Warp Knitting Coating Co., Ltd.

Desarrollo 2018

Principal: En 2018 comenzó la construcción de la segunda fase del proyecto MSD.

El 7 de mayo de 2018, se llevó a cabo en la nueva base del proyecto la ceremonia de inicio del nuevo proyecto de transformación técnica de material de protección ambiental compuesto funcional de 800 millones de metros cuadrados de MSD. El proyecto fue catalogado como un gran proyecto industrial en 2017, lo que es un hito en la historia de desarrollo del MSD.

2019 líder

En 2019, la construcción del proyecto de la segunda fase del MSD está en pleno apogeo y la preparación del proyecto de la tercera fase está en pleno apogeo.

El 30 de septiembre de 2019, todos los miembros de los cuatro equipos del Comité Municipal del Partido de Haining, el Congreso Popular Municipal, el Gobierno Municipal y la CCPPCh, los principales responsables del gobierno municipal, las zonas de desarrollo de los pueblos (subdistritos), la Yanguan Holiday Resort y el nuevo distrito de Jianshan totalizaron 80 Más personas vienen a visitar MSD.

2020 El rápido desarrollo

En 2020, se estableció Zhejiang MSD Group Share Co., Ltd. y comenzó la construcción de la tercera fase del proyecto MSD.

El 31 de mayo de 2020, se llevó a cabo dentro del MSD la finalización (puesta en servicio) de la segunda fase del proyecto MSD y el inicio de la tercera fase del proyecto, y líderes municipales de todos los niveles asistieron a la ceremonia.